Tonight was the first test to see how well the panels fitted together. Using a template 2mm holes were drilled at 6mm distances from the edge of the board, soft steel wire seemed to do the job as the stitch.
Subscribe to:
Post Comments (Atom)
skip to main |
skip to sidebar
Followers
Blog Archive
-
▼
2009
(29)
-
▼
September
(16)
- The boat takes it's final shape
- A canoe (shape) is born!
- Rough and ready bow fairing
- Quick bit of sowing after work!
- Stitching the canoe
- Job done!
- Tape is needed both sides
- Joint failed
- Joined up and left to set
- Epoxy Resin - first contact!
- Six hours work later
- Block Planing
- Jig Saw time!
- Marking up
- The Raw materials. Note the car boot sale square a...
- Stitch and Glue Canoes
-
▼
September
(16)
No comments:
Post a Comment